터보차저가 장착된 엔진에서 흡기매니홀드, 인터쿨러, 흡기호스 등의 누설 테스트용으로 제작되었음
에어 압력 레귤레이터가 장착되어 과도한 압력에 의한 흡기라인의 파손을 방지할 수 있음
35 - 40 -45mm 아답타
50 -55 -60mm 아답타
65 - 70 -75mm 아답타
80 - 85 -90mm 아답타
압력레귤레이터 (1 ~1.7bar)
원터치 타입 커넥터
Turbo Charging System Test Kit 9pcs
Helps to locate leaks in the components of turbocharger systems such as pressure hoses, air-to-air intercooler, etc. Testing must be performed when engine is switched off. For professional and economic diagnosis.
Connect an airline with known air pressure to the regulator of the tester with the ball valve shut (operating lever at 90° to hose axis).
IMPORTANT: Regulate air pressure in tester to 25psi maximum.
Refer to manufacturer’s manual relating to the maximum air pressure of the turbo or other system being tested. Over pressurisation may damage system components. For example the maximum pressure in most vehicle turbo systems is approximately 15psi (1bar) up to 25ps (1.7bar). A vehicle coolant system is typically rated at 15psi. A graduated approach to leakage testing is recommended.
Suitable for the following hose sizes:
• 35-40-45 mm
• 50-55-60 mm
• 65-70-75 mm
• 80-85-90 mm